Cracks, scratches or defective components on the motherboard can cause this error. If the previous steps did not help solve the problem, take motherboard In the repair shop for diagnosis. Make sure that the latest Windows update package is installed. Make sure the OS is entered into the Event Viewer system for additional error information that could help identify a failed device. Make sure all computer components are set properly. Solving the RAM failure problem: perform the hardware diagnostics of RAM. If the system is not loaded due to an error, use the Recovery Console and execute the chkdsk / r command.ĭefective hardware solution: If 2 parameter is 0xc0000185, and the page file is on SCSI disk, check the disk cable connections and SCSI contacts. To start checking the disk system partition, you must restart the computer. To do this, execute the chkdsk / f / r command. If AUTOCHK does not scan a hard disk for errors, run the check manually. The program will try to find damaged sectors to not use them in the future. Solving the problem of the damaged disk sector: Restart the computer to automatically start Autochk.

0xc0000185 or Status_io_Device_error, indicates an unsuitable completion or defective cable connections on SCSI devices or that two devices are trying to use the same IRQ.īlue screen can cause failed operational memory and virus action.

0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates the presence of failed blocks (sectors) on the hard disk.

0xc000009d or Status_Device_Not_connected, indicates defective cable connections, and that the controller does not see the hard disk.

0xC000009C or STATUS_DEVICE_DATA_ERROR, indicates the presence of failed blocks (sectors) on the hard disk.

0xc000009a or Status_insufficient_resources, indicates the lack of resources of the pool of inoperable memory.

Common values of this parameter are:

Content of the system table page (PTE) īy error status (2 parameter), you can determine the cause of BSOD.

Address of the system table page (PTE).

In all other cases, the parameters carry the following information:

The address of the InPagesUpport structure.

Error status (usually an I / O status code).

If the first parameter is 3 (and the third parameter nonzero), or 4, the parameters are the following definitions:

A virtual address that is not divided into memory pages.

If the blocking type is 1: Current process If the blocking type is 2 or 3: 0.

The type of blocking that was saved (1, 2, or 3).

If the first parameter is 1, 2, or 3, and the third parameter is 0, then the parameters have for the following definitions: The four parameters listed in the error may be three possible values. 0x0000007A Indicates that the required kernel data page from the page file cannot be loaded into memory.

Fix kernel_data_inpage_error